Installation Guide

“UNIDOOR PLUS (STYLE L)” Ver.1 Rev 4 06/2016
9
5. Remove the U-channel 1 (76”, wall
profile) (09), U-channel 2 (44”, bottom
profile) (29) and Anti-Water strip
(enclosure) (20) from the Stationary glass
(11) and set the Stationary glass aside.
Place the U-Channel 2 (bottom profile)
onto the threshold base in line with the
inside threshold mark .
Mark the drill holes on the threshold
through the predrilled holes in the U-
Channel 2 and drill the holes using Ø1/8”
drill bit.
Apply waterproof silicone along the bottom
surface and around the holes of the U-
Channel 2 and fasten it to the base with
the Countersunk screws ST4.2×40 (23).
NOTE: The surface needs to be clean and
free of debris before applying silicone.
See Fig. 6 & 7 for details.
Fig. 7
Fig. 6
Ø1/8”
1
3
5
2
4
6
inside
outside
U-Channel 1
U-Channel 2