Manual

© DreamLine
All Rights Reserved
© DreamLine
All Rights Reserved
23
UNIDOOR-X (STYLE M) manual Ver 2 Rev 1 02/2019
©2019 DreamLine. All Rights Reserved
5/8"
5/8” spacer included
with the door glass
Fig 21
Fig 20
Door
Glass
3
door
glass
2
door
glass
2mm hinge
gasket
inside
outside
1
5/8”
!
o
u
t
s
i
d
e
21. Attach the Handle (#02) onto the Glass door (#01).
(Fig 21)
** NOTE: It is strongly recommended
that the 5/8” shims be left beneath the
door glass until the silicone securing
the hinge panel glass has fully cured.
20.
The Door Glass (#01) ships with 5/8”
spacers. These 5/8” spacers will create the
proper spacing at the bottom of the door
glass and will ensure the installed door
height finishes at 72”. (but always confirm
with a measurement)
Set the Door Glass (#01) with the 5/8“
spacers attached onto the threshold, inline
with the Hinge Panel Glass (#32).
Level up the Door Glass (#01) with the
Hinge Panel Glass (#32) and fasten the
hinges onto the Door Glass (#01) using
one 2mm hinge gasket per side.
Make sure the top edges of the Door Glass
(#01) and Hinge Panel Glass (#32) are
aligned and that there is an even reveal
between the door and hinge panel glass.
(Fig 20)