Manual

© DreamLine
All Rights Reserved
© DreamLine
All Rights Reserved
13
UNIDOOR-X (STYLE M) manual Ver 2 Rev 1 02/2019
©2019 DreamLine. All Rights Reserved
Cut and install two 2”pcs of the
PVC Glass Spacer (0.5mm) (#34)
into the bottom U-channel to
protect the bottom edge and
corners of the glass
!
!
NOTE: It is required to allow the
silicone to fully cure in the U-channels
before installing the door glass.
Quick-drying/fast curing silicone is
recommended for the installation
of hinge panel glass into u-channels.
Fig 8
Hinge Panel
Glass Bracket
with gasket
8-3/8”
7-7/8”
t
o
p
b
o
t
t
o
m
Fig 7
7. Add the PVC Glass Spacer (0.5mm) (#34)
into the bottom U-channel to protect the
bottom corners of the glass.
Apply a bead of silicone into the length of the
U-channels. (Fig 7)
8. Install the Hinge Panel Glass (#32) into
the U-channel, checking for level and plumb.
Install the gasket into the Hinge Panel Glass
Bracket (#36). (Note: Make sure the top of
the hinge panel glass is at the top). (Fig 8)