Manual

Table Of Contents

UNIDOOR PLUS (STYLE I) manual Ver 1 Rev 6 10/2016

4. Measure the actual width of your Return

panel glass (26) panel.

NOTE: You will be doing straight and 45°

cuts for this enclosure installation.

*All 45° cuts are from the outside

dimension. (tip to tip)

*It may be necessary to remove any

burrs from the cut end of the U-channels

with a metal file before placing the U-

channel onto the glass.

Use a miter saw to rough straight cut one

of the U-channel 2 (44”, bottom profiles)

(29) to the actual width of the glass (+) 1-

1/4”.

See Fig. 3 & 4 for details.

Fig. 3

W (+) 1 1/4"

Fig. 4