Installation Guide

Tools Needed

Q-WALL Installation Manual Ver 2 112019 14

TOP

BOTTOM

W3:______

W2:______

W1:______

Fig 5

Fig 4

5. Use a straight edge and a fresh blade to score along the finished cut line several times to get a clean break. The Q-Wall Back Panel

will snap at the scored line. Fig 5

4. Transfer the meaurements from Step #2 to the back Q-Wall Back Panels. Measure out from one side to mark the Q-Wall Back Panels,

using a straight edge to mark a cut line. The overlap does not need to be centered. Fig 4