Manual

Tools Needed

Q-WALL Installation Manual Ver 2 112019 16

Fig 7

Fig 8

7. Apply tub surround adhesive to the back side of the underlapping Q-Wall Back Panel (the left Q-Wall Back Panel is shown as an

example). Install the left/underlapping Q-Wall Back Panel against the rear wall of the opening, pressing evenly over the entire surface

of the Q-Wall Back Panel, especially at the corners and the edges. Remove the protective plastic from the left side Q-Wall Back Panel

once installed. Fig 8

8. Dry fit the 2nd Q-wall Back Panel and

make any adjustments necessary. Fig 8