Manual

Tools Needed

Q-WALL Installation Manual Ver 2 112019 20

corner

back

of wall

15. Measure the location of the shower fixtures from each of the installed Q-Wall Back Panels. Transfer these

measurements to the corresponding Q-Wall Side Panel and drill the cutouts using a hole saw. Fig 15

Measure the fixture

locations on the wall

Right Q-Wall Side Panel with typical

fixture locations shown as an example.

Fig 15

Take exact measurements:

• from the vertical reference line to the center of the fixture holes: (A, B, C, G)

• from the tub deck or shower threshold up to the center of the fixture holes (D, E, F).