Manual

Tools Needed

The horizontal grout lines will not align in the corner(s) by design.

Attempting to align the horizontal grout lines may produce

undesired results to your installation. Try ipping the side panels

around to produce a more desirable staggering of the horizontal

grout lines.

Outside Edge Line

for side Q-wall

Fig 14

NOTE

Corner Alignment

examples:

Fig 13

Measure from

rear Q-wall to

outside edge

top

middle

bottom

13. Measure from the installed Q-Wall Back Panel to the intended outside edge on both side walls. Fig 13

14. Subtract 1/16” from the measurements in the previous step to allow space for the J-Strips. Transfer these measurements to the

Q-Wall Side Panel. Draw a cut line on the Q-Wall Side Panel, on the edge that will fit into the J-Strips. Score and cut the Q-Wall Side

Panel to size. Fig 14