Manual

Tools Needed

Q-WALL Installation Manual Ver 2 112019

Q-WALL Installation Manual Ver 2 112019 18

Fig 11

Fig 12

side wall

back wall

side walls

11. Dry fit the J-Strips into both back corners, with the wider flat side against the side walls, so the Q-Wall Side Panels can slide into

them easily. Fig 11

12. Apply clear silicone to the backs of both J-Strips and a thin bead of silicone into the corner of the opening. Press the J-Strips tight

into the back corners. Wipe away any excess silicone with a clean rag. Use an Ø 1/8” bit to drill into the wall through the holes in the

J-Strips. Secure the J-Strips with the

ST 4.2 x 30 Countersunk Screws (#05).

Be sure the screw heads are flush with the surface of the

J-Strips. Fig 12