Installation Guide

INFINITY-Z manual Ver 4 Rev 4 09/2016
10
12. Fasten the top and the bottom Wheel
assemblies (17) to the Door Glass (04). The
top wheels can adjust the door level using the
adjustable bolt and lock nut. The bottom wheel
has a press button to fix the wheel onto the
bottom Guide rail (03). The wheels will face
towards the outside of the shower.
Note:
The lock nut of the upper wheel (Fig 12.4) and
the press button of the bottom wheel
(Fig 12.1) should be pointing up.
See Fig. 12 for details.
13. Slide the top door wheels into the top Guide
rail (03). Push the bottom wheels into the
bottom Guide rail (03) by pressing down on
the press button.
If necessary, use a Phillips screwdriver #2 (do
not use a power screwdriver) to adjust the
upper wheels, make sure they roll smoothly
and the door closes tight.
See Fig. 13 for details.
Fig. 13
2
1
3
4
2
1
3
4
5
6
Fig. 12
inside
TIP: It may be easier to insert the
bottom wheels into the bottom guide
rail, lift the door up and snap the top
wheels into the upper guide rail.