Installation Guide

INFINITY-Z manual Ver 4 Rev 4 09/2016

5. Slide the Stationary glass (05) fully into the groove of the Glass

profile (01), and then secure the Glass holder (16) to the bottom

Guide rail (03) with the Flat head screw ST4.2 x 16 (12).

See Fig. 6 for details.

Fig. 6

6. Starting from the bottom, insert the Single side strip (08) into

the groove between the glass and the glass profile using a

wooden or plastic shim. The strip should be inserted from the

side that will face inside the shower.

ATTENTION:

To prevent scratching or damaging the glass and aluminum:

Do not use a screwdriver or other metal object to insert the

Single side strip (08).

7. Repeat Step #3, Step #4, Step #5 and Step #6 to fasten the top

Guide rail (03) to the Glass profiles (01) and secure the

Stationary glass (05) with the remaining Glass holder (16) and

Flat head screw ST4.2 x 16 (12).

See Fig. 7 for details.

Fig. 7

TIP: Apply a thin bead of silicone to the bottom rail

prior to setting your glass. See the detail below.

inside