Installation Guide

11ENCORE / BRAVO Manual Ver 1 Rev 4 11/2016
Fig 6
5
3
4
2
Ø1/8”
Ø5/16”
or
1
6. Position the Bottom guide rail (#15) on the
threshold and mark the threshold through the
center guide holes for drilling.
Remove the Bottom guide rail (#15) and
drill into the thresohold:
ŁDrill Ø1/8” holes for installation into an acrylic
threshold
ŁDrill Ø5/16” holes and use anchors for
installation into a tile threshold.
Apply silicone to the bottom surface of the
Bottom guide rail (#15) and place it back into
position on the threshold.
Attach the Guide block (#05) and Bottom
guide rail (#15) to the threshold using two of
the ST4.2 x16 screws (#12). Cover the screw
holes with the decorative caps.
See Fig 6 for details