Installation Guide

9ENCORE / BRAVO Manual Ver 1 Rev 4 11/2016
Fig 4b
Fig 4a
1
32
Ø5/16
(8mm)
4. Attach the Upper guide rail connectors (#07) to the top of both Wall Profiles (#01) using the
ST4.2 x 30 Truss head screws(#13). (Fig 4a)
Position one Wall Profile (#01) against the wall onto the Bottom Guide Rail (#15) . Check for plumb
with a level and mark the position. Mark both holes in the Upper Guide Rail Connector (#07) for
drilling. (Fig 4b). Remove the wall profile and drill Ø 5/16” holes and insert the Wall anchors (#09).
See Fig 4a and 4b for details
TIP: Add a few drops of
dish soap to the screws to
make installation easier.