Installation Guide

10ENCORE / BRAVO Manual Ver 1 Rev 4 11/2016
Fig 5
1
2
5. Apply silicone to the back of the Wall Profile (#01)
and place it back into position on the wall. Attach the
Upper Guide Rail Connector (#07) using two each of
the ST4.2 x 40 Countersunk Flathead Screws (#10).
Attach two of the Wall Profile Bumpers (#04) using
the ST4.2 x 10 screws (#11) and cover the holes with
the decorative caps.
See Fig 5 for details