Installation Guide

13ENCORE / BRAVO Manual Ver 1 Rev 4 11/2016

Fig 9

Fig 8

9. Install the Upper Guide Rail (#02) onto the

installed Wall profiles (#01) making sure that it sits

firmly onto the Wall profile connectors (#07).

See Fig 9 for details

8. Apply silicone to the back of the Wall Profile (#01)

and place it back into position on the wall. Attach the

Upper Guide rail connector (#07) to the wall using two

each of the ST4.2 x 40 Countersunk flathead screws

(#10).

Attach two of the Wall Profile bumpers (#04) using

the ST4.2 x 10 screws (#11) and cover the holes with

the decorative caps.

See Fig 8 for details