Installation Guide

14ENCORE / BRAVO Manual Ver 1 Rev 4 11/2016
Fig 10
Fig 12
Fig 11
lift Upper guide rail
approx 1”
Inside
door glass
Outside
door glass
Outside
door glass
Outside
of shower
Inside
door glass
Outside
of shower
Outside
of shower
Outside door glass
Inside door glass
Outside
door glass
Outside
of shower
11. Have an assistant carefully lift one end of the
Upper Guide Rail (#02) about one inch - just to the
top of the Upper Guide Rail Connector (#07).
See Figs 11 and 12 for details
10. Install the Roller Assemblies (#06) onto the tops of both doors. Be sure to position the rollers
facing in the correct direction for each door - both wheels facing ‘out’ for the outside door glass, and
both wheels facing ‘in’ for the inside door glass. Bring both lites of Door glass (#03) into the shower
area for hanging. Using padding to protect the glass and shower area.
See Fig 10 for details
Note:
Do not attach the Towel bars (#08) to the Door glass (#03) until instructed.
Do not attempt to lift the glass with the towel bars as doing so may cause damage
to the glass and/or serious personal injury. Use an assistant or a professional grade
glass suction cup to handle the glass.