Installation Guide

15ENCORE / BRAVO Manual Ver 1 Rev 4 11/2016
Fig 13
Fig 14
Inside door
outside
of
shower
outside
of
shower
Outside door
Inside
door glass
Outside
door glass
Outside
door glass
Outside
door glass
10. Install the Roller Assemblies (#06) onto the tops of both doors. Be sure to position the rollers
facing in the correct direction for each door - both wheels facing ‘out’ for the outside door glass, and
both wheels facing ‘in’ for the inside door glass. Bring both lites of Door glass (#03) into the shower
area for hanging. Using padding to protect the glass and shower area.
See Fig 10 for details
12. Using an assistant to support the Upper Guide
Rail (#02), lift and insert the outer door glass up into
the Upper Guide Rail (#02) so the Roller Assemblies
(#06) fit into the groove inside the rail. Carefully lower
the Upper Guide Rail (#02) so the door glass slides
into the proper slot in the Guide block (#05).
See Fig 13 for details
13. Next, install the inner door glass in the same
manner. Move the installed door to the opposite end, lift
the Upper Guide Rail (#02), and install the inner door
glass into the Upper Guide Rail (#02) and into the
Guide block (#05).
See Fig 14 for details