Installation Guide

13
MIRAGE-X / BELLA manual Ver 1 Rev 4 07/2017
©2017 DreamLine. All Rights Reserved
Remove the 3M tape
backing
Fig 13
1
2
inside
Fig 14
Width of
Panel Glass
Caulk
bottom rail
u-channel
13. Apply silicone into the Wall profile/U-Channel
(#17) and into the Bottom Guide Rail (#03) equal
to the width of the panel glass. (Fig 14)
12. To install the bottom Bumper (#11); First, clean the area with an
alcohol swab. Remove the 3M tape backing from the Bumper (#11) and
install the Bumper (#11) onto the Bottom Rail (#03) firmly against the
wall and the
Wall profile/U-Channel (#17). (Fig 13)
(Attaching the bottom Bumper (#11) with a screw is optional)