Installation Guide

16
MIRAGE-X / BELLA manual Ver 1 Rev 4 07/2017
©2017 DreamLine. All Rights Reserved
Fig 19
Fig 20
0-1/16
”(
2mm)
5
6
2
4
Max 3/16” (4mm)
M
ax 3/16”(
4
m
m)
31
13. Re-attach the L-Bar™ (#5.3) to the Wall Plate
(#5.6) and adjust the angle (+/-)3/16” (4mm) if
necessary using the set screws (Fig 19.3 and 19.4).
Tighten all screws and attach the Decorative
Cover (#5.4).
Secure the L-Bar™ (#05) to the top of the
Stationary Panel Glass (#01) using the clear
gasket and rubber-tipped set screws.
(Fig 19 and Fig 20)