Installation Guide

UNIDOOR (STYLE B & C) Ver 2 Rev 10 09/2016
6
NOTE: The Unidoor shower door needs to be
installed prior to proceeding with the following
Stationary Glass installation instructions. Please
see the Single Shower Door installation manual
included in the door packaging for complete
shower door installation instructions. Before you
begin the installation, please recheck your shower
opening size. Specific size information can be
found on our website at DreamLine.com
NOTE: The Unidoor hinge is factory set to over close 8°.
The following procedure is recommended to ensure
proper alignment of the panel glass and door glass.
1. Align the Door so that it is perpendicular to the wall and
parallel to the threshold. Measure across the bottom span of
the Door and threshold on the outside of shower and
determine an equal value.
Mark a line on the threshold base on the handle side
See Fig. 1 for details.
Value
inside
outside
outside
inside
Door
2
1
Fig. 1
The glass surface
with the ClearMax™
label must be
installed to face
inside of the shower