Installation Guide

Installation steps

INLINE PANEL - Style B shower panel manual Ver 1 Rev 1 07/2018

Fig 1

outsideoutside

OOR

1 2

NOTE: The UNIDOOR or ELEGANCE shower door

needs to be installed prior to proceeding with the

following Inline Panel Glass installation. Please see the

Single Shower Door installation manual included in the

door packaging for complete shower door installation

instructions. Before beginning the installation, recheck the

finished opening size. Specific model size information can

be found on DreamLine.com.

NOTE: The left-swing Unidoor door installation is

shown as an example throughout this manual. Use

the same method for aligning the door and panel

for the Elegance door and inline panel installation.

NOTE: The Unidoor and Elegance hinges are

factory set to over close 8°. The following

procedure is recommended to ensure proper

alignment of the panel glass and door glass.

UNIDOOR shown

as an example

1. Align the Door so that it is perpendicular to the wall and parallel with the outside of the threshold.

Mark a line on the threshold for reference. Open the door to allow space for the panel installation.

(Fig 1)