UNIDOOR (STYLES B&C) SHOWER DOOR & GLASS PANEL INSTALLATION INSTRUCTIONS IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings, manuals, warranty information or additional details please refer to your model’s web page on DreamLine.com STYLES B & C STEP 1: INSTALL SHOWER DOOR STEP 2: INSTALL PANEL Please read these instructions carefully before installing.
UNIDOOR/UNIDOORLUX/UNIDOOR PLUS SINGLE SHOWER DOOR INSTALLATION INSTRUCTIONS IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings, manuals, warranty information or additional details please refer to your model’s web page on DreamLine.
UNIDOOR STYLES Models with Glass-to-Wall hinges Style C Style B Style A Style E Style F Style J Style I “UNIDOOR” Single Shower Door Ver.2 Rev.
Models with Glass-to-Glass hinge panels: For Glass to Glass hinge Door installation use the installation manual packaged with the Hinge panel glass “UNIDOOR” Single Shower Door Ver.2 Rev.
STYLE A UNIDOOR Single shower door 23”- 30” Refer to detailed diagram on page 5 of this manual for assembly instructions STYLE B * UNIDOOR Shower door 23” – 30” with 6” small or 12”-30” large stationary panel STYLE C * UNIDOOR Shower door with 12”-30” large stationary panel STYLE D * UNIDOOR LUX Shower door with 6” small or 14”-30” large stationary panel STYLE E * UNIDOOR LUX Shower enclosure with 30” return stationary panel STYLE F * UNIDOOR PLUS Shower door with 6”-34” in-line stationary panel secured usi
STYLE M3 *^ UNIDOOR Z Shower door 23”~30” with 6” or 24” hinge panel, with 6”, 6-1/2”, 14”, 14-1/2”, 22” or 22-1/2” full height inline panel and 30” - 34” full height return panel secured using u-channel STYLE M4 *^ UNIDOOR Z Shower door 23”~30” with 6” or 24” hinge panel, with 12”, 18”, 24” or 26” in-line buttress panel and 30”- 40” buttress return panel secured using u-channel * For the panel installation instructions, please refer to the separate manual included in the panel glass packaging.
Preparation 1. Prior to installation, examine all boxes and packages for shipping damage and compare the piece count with your packing slip. After opening all boxes and packages read this introduction carefully. Check that all of the needed parts are included in the package by checking off the components on the “Detailed Diagram of Shower Door Components”.
Tools Required “UNIDOOR” Single Shower Door Ver.2 Rev.
“UNIDOOR” Single Shower Door Ver.2 Rev.
“UNIDOOR” Single Shower Door Ver.2 Rev.
“UNIDOOR” Single Shower Door Ver.2 Rev.
Detailed Diagram of Shower Door Components 4 1 31 5 2 6 7 8 Packing List Part# 01 02 04 05 Description Door glass Handle Countersunk screw ST5×70 Hinge with Adjustable angle Qty 1pc 1pc 8pcs 2pcs Part# 06 07 08 31 Description Side strip ( 3 sections to cut) Bottom anti-water strip L-shaped strip PVC hinge spacer Qty 1pc 1pc 1pc 4pcs NOTE: Unpack your unit carefully and inspect it. Lay out and identify all parts using the detailed diagram and packing list in this manual as a reference.
Single Shower Door Assembly and Installation NOTE: The following shower door installation instructions should be used as a general guide and prerequisite to the installation of the UNIDOOR, UNIDOORLUX and UNIDOOR PLUS models. Before you begin the installation, please check your finished opening size. Specific size information can be found on our website at DreamLine.
2. The Door Glass (01) ships with four 5/8” shims attached to the top (2pcs) and bottom (2pcs). Determine the swing of your door and only remove the shims from the top of the door glass, leaving the bottom shims in place. Set the Door Glass (01) onto the threshold at the desired location and check for level. These 5/8” shims will leave the proper spacing at the bottom of the door glass and will ensure that the door height finishes at 72”, but always confirm with a measurement.
1 TIP: The PVC hinge spacer can also be used as a template to assist with marking the hinge mounting holes. 2 3 Fig. 4 ATTENTION: The back plate of the hinge from inside the shower locates too close to the drilled holes in the wall and might get scratched by the long screws or screwdriver. Be careful not to scratch the hinge surface. (OPTIONAL) 4. Carefully remove back plates from the Hinges (05) and set the Door Glass (01) aside.
Setting the Adjustable Hinges The Adjustable hinges are pre-set to overclose to 85º and are adjustable up to 90º after the door is installed. Once the door glass is installed, simply loosen the allen set screws and position the door to the desired closed position. While holding the door in the new closed position, retighten the allen screws and your door will now self-center to the chosen closed position. 4a.
4b. The hinges are factory set to 85 degrees. You can change this angle by using the adjustment screws on the hinge plate. (Figure 5b) inside outside Figure 5b 4c. Use the supplied Allen Key to loosen the adjustment screws on the inside hinge plate, adjust the door to the desired angle (90 degrees for example) then retighten the adjustment screws (Figure 5c). Be sure that you create a tight seal with the supplied strike vinyl when the door is in the closed position.
5. Mount the Handle (02) to the Door Glass (01). See Fig. 6 for details. NOTE: DO NOT attach the handle to the door glass until instructed to do so. DO NOT use the handle to lift the glass during installation. This may result in damage to the glass and/or serious injury. Always use an assistant or a professional grade glass suction cup when handling the door glass. Fig. 6 6. Measure the bottom of the Door Glass (01) from end to end to determine the actual width of the door.
1 Into the hinge Into the hinge 3 4 7/8" 7/8" Into the hinge 5 See Fig. 8 for details 2 7/8" 7. Get three measurements: from the top edge of the Door Glass (01) to the upper body of the top Hinge (05) (+) 7/8” from the lower body of the upper Hinge to the upper body of the bottom Hinge (+) 1-3/4” from the lower body of the bottom Hinge to top of the installed Bottom anti-water strip (07) (+) 1-7/8” Cut the Side strip (06) according to the measurements.
Fig. 10 “UNIDOOR” Single Shower Door Ver.2 Rev.
Style “A”: Half Etched Glass Installation NOTE: This model features the half etched glass option. Hinged Left installation shown. To install for hinged Right, flip the door to the proper handing. -The textured surface of the glass door should face out. See Fig. 11 for details. Fig. 11 “UNIDOOR” Single Shower Door Ver.2 Rev.
Product Maintenance BASES and BACKWALLS: To ensure long lasting life for your acrylic back walls: wipe them off after each use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream based cleaners. Avoid the use of aerosol spray cleaners. Never use abrasive cleansers, metal brushes or scrapers that could scratch or dull the surface. GLASS: To ensure long lasting life for your glass shower products: wipe them off after each use with a soft cloth.
TEL: 866-731-2244 FAX: 866-857-3638 DREAMLINE.COM For more information on DreamLine® Shower Doors and Enclosures please visit DreamLine.
UNIDOOR (STYLE B & C) SHOWER DOOR GLASS PANEL INSTALLATION INSTRUCTIONS IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings, manuals, warranty information or additional details please refer to your model’s web page on DreamLine.com Style B Style C Please read these instructions carefully before installing.
Model#s: SHDR-20297210 SHDR-20307210 SHDR-20317210 SHDR-20327210 SHDR-20337210 SHDR-20347210 SHDR-20357210 SHDR-20367210 Model#s: SHDR-20417210C SHDR-20427210C SHDR-20437210 SHDR-20447210 SHDR-20457210 SHDR-20467210 SHDR-20477210 SHDR-20487210 SHDR-20477210C SHDR-20487210C SHDR-20497210 SHDR-20507210 SHDR-20517210 SHDR-20527210 SHDR-20537210 SHDR-20547210 SHDR-20537210C SHDR-20547210C SHDR-20557210 SHDR-20567210 SHDR-20577210 SHDR-20587210 SHDR-20597210 SHDR-20607210 Finishes: -01 Chrome “UNIDOOR (STYLE B
Preparation 1. Prior to installation, examine all boxes and packages for shipping damage and compare the piece count with your packing slip. After opening all boxes and packages read this introduction carefully. Check that all of the needed parts are included in the package by checking off the components on the “Detailed Diagram of Shower Door Components”.
Detailed Diagrams of Shower Door Components Diagram B Diagram A 12 11 10 12 9 11 10 9 13 13 14 14 15 15 16 16 17 17 18 19 18 21 19 22 23 23 Diagram A 09 10 11 12 13 14 Wall profile Glass profile Stationary glass Support bar * Wall Anchor * Round head screw ST4.2×10 1pc 1pc 1pc 1pc 4pcs+1pc 3pcs 15 16 17 18 19 23 Big flat head screw ST4.2×40 Round head screw ST4.2×35 Decorative screw cover Bottom bracket Anti-Water strip (inline panel) Countersunk screw ST4.
NOTE: The Unidoor shower door needs to be installed prior to proceeding with the following Stationary Glass installation instructions. Please see the Single Shower Door installation manual included in the door packaging for complete shower door installation instructions. Before you begin the installation, please recheck your shower opening size. Specific size information can be found on our website at DreamLine.com NOTE: The Unidoor hinge is designed to over close 8°.
Style “B” and “C”: Stationary Glass Assembly and Installation NOTE: Use parts from Diagram “A” or “B” (depending on your model style) for the Stationary Glass assembly and installation. Style B 2. Apply clear silicone along the inner channel of the Glass profile (10) and insert the Stationary glass (11) into the channel. Style C 1 2 3 4 ATTENTION: Please note that the bottom hole in the corner of the Stationary glass should be away from the Glass profile not next to it.
3. Press the Anti-Water strip (inline panel) (19) onto the vertical edge of the Stationary glass (11). Attach the Bottom Bracket (18) through the bottom hole of the Stationary glass. 1 2 inside inside outside outside See Fig. 3 for details. 3 4 2 inside inside Fig. 3 4. Carefully butt the Stationary glass (11) up against the wall vertically. outside See Fig. 4 for details. inside Fig. 4 “UNIDOOR (STYLE B & C)” Ver.2 Rev.
5. While securely holding the Stationary glass (11) close the Glass Door and align the Stationary glass to it. Use the door mark that was made in step #1 on the threshold as a reference to ensure that the Door is perpendicular to the wall. If needed, adjust the position of the Stationary glass so that the Anti-Water strip (inline panel) (19) makes tight contact to the Glass Door from top to bottom. NOTE: The top of the Stationary glass must be leveled with the Glass door.
7. Drill the hole into the shower base or threshold for the Bottom bracket (18) using Ø 1/8” drill bit at the drill mark that was made in step #5. Use the Round head screw ST4.2x35 (16) along with a raised white washer to attach the Bottom Bracket to the shower base or threshold. Move the Stationary Glass (11) back into position and insert the Glass profile assembly into the Wall profile (09). Secure the Bottom Bracket (18) to the Stationary Glass.
8. Recheck the alignment and spacing of the Glass Door and Stationary glass (11) to make sure the Door still opens and closes correctly. After final adjustments of the Stationary glass drill the holes in the Glass profile (10) through the predrilled holes in the Wall profile (09) using an Ø 1/8” drill bit. NOTE: You only need to drill through the first layer of the Glass Profile. 2 1 Ø1/8” 3 Use Round head screws ST4.2×10 (14) to attach the Wall profile to the Glass profile.
Style “B”: Support bar Assembly and Installation NOTE: Use parts from Diagram “A” for the Support Bar assembly and installation. 10. Locate the Support bar (12). Adjust the bar to a proper position on the glass and the wall. Level it horizontally. Hold it firmly and outline the bracket’s position on the wall. Remove the Support bar and detach the wall bracket from it. Place the wall bracket against its outlined position on the wall and mark the drilling hole.
11. Apply a good quality mildew-resistant silicone along the connection of the Stationary glass to the wall and the Shower base or threshold. Allow 24 hours for the silicone to fully cure before using the shower. See Fig. 12 for details. Caulk Fig. 12 “UNIDOOR (STYLE B & C)” Ver.2 Rev.
Style “C”: Glass Shelves* Assembly and Installation NOTE: Use parts from Diagram “B” for the Glass Shelves* assembly and installation. 12. Mark the Glass shelf* (12) position on the wall. According to the measurements in Fig. 13.1, mark the drilling holes for the Shelf brackets* (without nut) (22). Drill the holes using Ø 5/16” drill bit and insert the Wall anchors* (13). Attach the Shelf brackets* (without nut) to the wall using the Countersunk screw* ST4.
Fig. 14 13. Apply a good quality mildew-resistant silicone along the connection of the Stationary glass to the wall and the Shower base or threshold. Allow 24 hours for the silicone to fully cure before using the shower. See Fig. 15 for details Caulk Fig. 15 “UNIDOOR (STYLE B & C)” Ver.2 Rev.
Product Maintenance BASES and BACKWALLS: To ensure long lasting life for your acrylic back walls: wipe them off after each use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream based cleaners. Avoid the use of aerosol spray cleaners. Never use abrasive cleansers, metal brushes or scrapers that could scratch or dull the surface. GLASS: To ensure long lasting life for your glass shower products: wipe them off after each use with a soft cloth.
TEL: 866-731-2244 FAX: 866-857-3638 DREAMLINE.COM For more information on DreamLine® Shower Doors and Enclosures please visit DreamLine.com “UNIDOOR (STYLE B & C)” Ver.2 Rev.