Installation Guide

“UNIDOOR” Single Shower Door Ver.2 Rev.2 06/2016

Single Shower Door Assembly and Installation

NOTE: The following shower door installation instructions should be used as a general

guide and prerequisite to the installation of the UNIDOOR, UNIDOORLUX and UNIDOOR

PLUS models. Before you begin the installation, please check your finished opening size.

Specific size information can be found on our website at DreamLine.com

1. Attach the Hinges (05) to the Door Glass (01) using at least one

(2mm) vinyl hinge gasket per side.

See Fig. 1 for details.

ATTENTION:

Never set your glass down directly

onto a tile or concrete floor.

Always use a piece of wood or cardboard

and leave the corner pads and protective

shims on the glass until it becomes

necessary to remove them to protect the

bottom edge and corners from damage

which could lead to breakage.

ATTENTION:

For Styles E, I, J, K & L that have return panels:

Please check model dimensions for proper placement of the Glass door (01) so that it will

align correctly with the return panel glass.

Fig. 1

ATTENTION:

This door is extremely

heavy and the hinges

on this door must be

attached to the studs

or to preinstalled 2 ×

6 wood reinforcement

behind the wall.

inside

outside