Installation Guide

“UNIDOOR (STYLE B & C)” Ver.2 Rev.9 06/2016

Style “B” and “C”: Stationary Glass Assembly and Installation

NOTE: Use parts from Diagram “A” or “B” (depending on your model style) for the

Stationary Glass assembly and installation.

Style B

Style C

2. Apply clear silicone along the inner channel of

the Glass profile (10) and insert the

Stationary glass (11) into the channel.

ATTENTION: Please note that the bottom

hole in the corner of the Stationary glass

should be away from the Glass profile not

next to it.

NOTE: If you have difficulty sliding the

Glass profile over the Stationary glass, you

can slightly tap on the Glass profile with a

rubber mallet and a piece of wood.

NEVER use a metal hammer or hit the

profile without the wood bumper.

Insert the Stationary glass with attached

Glass profile into the Wall profile (09).

See Fig. 2 for details.

Fig. 2