Installation Guide

“UNIDOOR (STYLE B & C)” Ver.2 Rev.9 06/2016
10
8. Recheck the alignment and spacing of the
Glass Door and Stationary glass (11) to
make sure the Door still opens and closes
correctly. After final adjustments of the
Stationary glass drill the holes in the Glass
profile (10) through the predrilled holes in
the Wall profile (09) using an Ø 1/8” drill
bit.
NOTE: You only need to drill through the
first layer of the Glass Profile.
Use Round head screws ST4.2×10 (14) to
attach the Wall profile to the Glass profile.
Cover the exposed screw heads with
Decorative screw cover (17).
See Fig. 9 and Fig. 10 for details.
9. Apply the sealant along the connection of the
Stationary glass to the wall and the Shower base or
threshold.
If the Stationary Panel width is 6”, the
installation is finished.
If the Stationary Glass width is 12” and over
you will need to continue your installation
from:
a) Style B for Support Bar installation.
b) Style C for Glass Shelves installation.
See Fig. 10 for details.
Style B
Style C
Fig. 10
Ø1/8”
2
3
1
Fig. 9