Installation Guide

INLINE PANEL - Style C shower panel manual Ver 1 01/2018

NOTE: Only drill through the first layer of the Glass Profile.

Fig 8

Fig 9

Ø1/8"

2 3

NOTE: The installation is not complete

until the required glass support shelves

are installed. Proceed to the next step.

washer

screw

decorative cap

inside

9. Apply a good quality mildew-resistant silicone along

the connection of the Wall Profile to the wall and the

Panel Glass to the threshold. (Fig 9)

8. Recheck the alignment and spacing of the Door Glass and Panel Glass (#11) and test the operation

of the Door. After final adjustments of the Panel Glass (#11) drill holes into the Glass Profile (#10)

through the predrilled holes in the Wall Profile (#09) using an Ø1/8” drill bit.

Use the Pan Head Screws ST4.2×10 (#14) and Washers (#17) to attach the Wall Profile (#09) to the

Glass Profile (#10). Cover the exposed screw heads with Decorative Screw Cover (#17). (Fig 8)