Installation Guide

UNIDOOR LUX (STYLE D) manual Ver 3 Rev 1 02/2018 8

Fig 2

Fig 3

Fig 1

inside

outside

inside

outside

inside

outside

inside

Value

inside

outside

Door

outside

inside

NOTE: The Unidoor hinge is factory set to overclose

by 8°. The following procedure is recommended to

ensure proper alignment of the panel glass with the

door glass. Details regarding the Adjustable hinge

features can be found in the door manual.

NOTE: Use parts from “Detailed Diagram of Panel Glass Components”

for the Stationary Glass assembly and installation.

1. Align the Door so that it is perpendicular to the

wall and parallel to the threshold. Measure across

the bottom span of the Door and threshold on the

outside of shower and determine an equal value.

Mark a line on the threshold on the handle side.

(Fig 1)

2. Mount the two Wall Brackets (#24) through

the notches on the Stationary Glass (#11).

Press the Anti-Water Strip (inline panel) (#19)

onto the vertical edge of the Stationary Glass

(#11).

Attach the Bottom Bracket (#18) through the

bottom hole of the Stationary Glass (#11).

(Fig 2)

3. Carefully butt the Stationary Glass (#11) up against the

wall vertically. (Fig 3)