Installation Guide

UNIDOOR LUX (STYLE D) manual Ver 3 Rev 1 02/2018 10

Fig 5

inside

outside

inside

outside

Ø 5/16"

6. Open the Door Glass and carefully set the Stationary Glass (#11) aside.

Remove the Wall Brackets (#24) and Bottom Bracket (#18) from the Stationary Glass (#11).

Replace the Wall Brackets (#24) to the outlined positions that were made in step #4 and mark the drill

holes on the wall.

Drill the holes using a Ø5/16” drill bit, insert a Wall Anchor (#13) and fasten the Wall Brackets (#24)

to the wall with the Big Flat Head Screws ST4.2×55 (#15). (Fig 5)