Installation Guide

UNIDOOR LUX (STYLE D) manual Ver 3 Rev 1 02/2018 11

outside

inside

**Ø 1/8"

or Ø 5/16”

inside

outside

Fig 6

Fig 7

Fig 8

outside

inside

outside

7. Drill the hole for the Bottom Bracket (#18)

into the shower base or threshold at the mark

that was made in step #4.

** Use an Ø1/8” drill bit for installation into an

acrylic base OR use a Ø5/16” drill bit and an

anchor for installation into a tile threshold.

Use the Round Head Screw ST4.2x35 (#16)

along with a raised white washer to attach the

Bottom Bracket (#18) to the shower base or

threshold. (Fig 6)

8. Move the Stationary Glass (#11) back into

position, and assemble the Wall Brackets (#24).

Assemble the Bottom Bracket (#18) onto the

Stationary Glass (#11).

Cover the Bottom Bracket (#18) screw head

with Decorative Screw Cover (#17). (Fig 7 & 8)

NOTE:

If installing the 6” panel glass, this part of the installation is complete, go to step #12.

If installing larger (14”~30”) panel glass, continue onto step #9 to install the L-Bracket (#35).