Installation Guide

UNIDOOR LUX (STYLE D) manual Ver 3 Rev 1 02/2018 13

Ø5/16"

Fig 9

Fig 10

Max 5/32"

(4mm)

Max 5/32"(4mm)

level

9. Position the L-Bracket Assembly (#35.3) onto the Stationary Glass (#11) as shown and mark its

position. Remove the Wall Plate (#35.6) from the L-Bracket. Position the Wall Plate (#35.6) on the

marks on the wall. Check for level and mark the holes on the wall for drilling through the wider, untapped

holes (Fig 9.2). Drill two Ø5/16”(8mm) holes and insert the Ø5/16” Wall Anchors (#13). (Fig 9)

10. Attach the Wall Plate (#35.6) to the wall using the ST4.2 x 40 (#23) screws.

Re-attach the L-Bracket (#35.3) to the Wall Plate (#35.6) using the Flat Head Screw M5x14 (#35.8)

and adjust the angle if necessary by using the Wall Plate Adjustment Set Screws (#35.9). (Fig 10)