Installation Guide

Table Of Contents

“UNIDOOR (STYLE G)” Ver 1 Rev 5 06/2016

6. Remove the U-Channel 2 (bottom profile) (29) and U-channel

1 (wall profile) (09) from the Stationary glass (11). Carefully

set the Stationary glass aside.

See Fig. 8 for details.

7. Place the c u t U-Channel 2 (bottom

profile) (29) onto the

ledge in line with the

inside mark

Mark the drill holes on the ledge through

the predrilled holes in the U-Channel 2

and drill the holes using Ø5/16” drill bit.

Insert the Ø5/16” Wall anchors (13).

Apply waterproof silicone along the bottom

surface and around the holes of the U-

Channel 2 and fasten it to the ledge with

the Countersunk screws ST4.2×40 (23).

NOTE: The surface needs to be clean and

free of debris before applying silicone.

See Fig. 9 & 10 for details.

U-channel 2

U-channel 1

Fig. 8

Fig. 9

Ø5/16”

inside

outside