Installation Guide

“UNIDOOR” Single Shower Door Ver.2 Rev.2 06/2016

ATTENTION:

The back plate of the hinge from inside the

shower locates too close to the drilled holes in

the wall and might get scratched by the long

screws or screwdriver. Be careful not to scratch

the hinge surface.

(OPTIONAL)

4. Carefully remove back plates from the Hinges (05)

and set the Door Glass (01) aside.

Screw in the rest of the Countersunk screws ST5 x

70 (04) into the wall, place the Door Glass (01) with

the spacers back to its position and reassemble the

Hinges (05). Once the door glass is secure, remove

the 5/8” spacers from beneath the Door Glass (01).

See Fig. 5 for details.

Fig. 5

Fig. 4

TIP: The PVC hinge spacer can

also be used as a template to

assist with marking the hinge

mounting holes.

inside