User Guide

“AQUA SERIES TUB EX/RT”, PANEL Rev.1 Ver.1 06/2014
4
Configuration 2: 9” In-Line Extender Panel Installation
NOTE: The following installation instructions apply
to all of the Aqua series tub doors. Please install
whichever Aqua model you purchased prior to
proceeding with the following Stationary Glass
installation instructions. Please see the Shower /
Tub Door Installation manual included in the door
packaging for complete tub door installation
instructions.
NOTE: The “Standard” Aqua Hinged Tub Door is
the example shown throughout this installation
manual.
NOTE: Use parts from Diagram “A” for the glass
panel assembly and installation.
1. Slip the U-channel 2 (bottom profile) (02) and U-
channel 1 (wall profile) (01) onto the Extender
panel glass (16) in the shown locations.
With the door open, place the Extender panel glass
onto the middle of the tub ledge ensuring that the U-
channel 1 (wall profile) (01) is flush with the wall.
Close the Glass Door and align the Extender panel
glass to it.
Ensure that the Extender panel glass is precisely in
line with Door and level vertically.
Outline the position of the Extender panel glass
along the inside edge of both U-channels on the wall
and tub ledge.
See Fig. 1 for details.
Align the Extender
glass with the Door
inside
Extender
glass
U-channel 1
U-channel 2
inside
outside
Door
Extender
glass
Door
inside
wall
wall
inside
outside
inside
wall
1
3
5
2
4
6
Fig. 1