Installation Guide

ELEGANCE / ELEGANCE-LS / ATLAS (Style A) shower door manual Ver 1 01/2018
9
©2018 DreamLine. All Rights Reserved
Fig 2
Fig 3
1
2
3
4
1
2
3
top left/ bottom right pivot shown
as viewed from outside
2. Separate the Pivot Retainers (#08) from the Pivot
Assemblies (#07) by removing the Round Head Socket Bolt
M6×12 (#17).
Insert the Pivot Retainers (#08) into both ends
of the Wall Profile for Pivot Side (#01). (Fig 2)
3. Run a bead of silicone along the
holes on the wall and on the back of
the Wall Profile for Pivot Side (#01).
Attach the Wall Profile for Pivot
Side (#01) and Pivot Retainer (#08)
to the wall using the Large Truss Head
Screws ST4.2×40 (#16). (Fig 3)