Installation Guide

ELEGANCE / ELEGANCE-LS / ATLAS (Style A) shower door manual Ver 1 01/2018

NOTICE: The Door Glass (#03) has a top and a bottom notch for the pivots. The notch at

the top is deeper and the notch at the bottom is shallower (to allow space for the bottom

sweep vinyl). Identify this difference to prevent installing the Door Glass upside-down.

Use caution when handling the Door Glass.

Fig 6

Fig 7

inside

outside

bottom

top

gaskets

Elegance

Elegance-LS / Atlas

*The Elegance-LS / Atlas

model comes with the

square back-to-back handle.

*The Elegance model

comes with the single

sided handle.

DO NOT lift the Door Glass with the handle.

See Pivot Assembly parts list on Page 6 for reference

7. Attach the *Handle (#06 or #06-LS) onto the Door Glass (#03).

(Fig 7)

6. Remove the Bolts (L) and Back

Plates (K) from the top and bottom

Pivot Assemblies (#07).

Position the Door Glass (#03) onto

the Pivot Assemblies (#07). Hold

the Clear Gaskets (J) in place on

either side of the Door Glass

and attach the Back Plates (K).

Tightly secure the Door Glass (#03) to

the Pivot Assemblies (#07) using

Bolts (L). (Fig 6)