Installation Guide

ELEGANCE / ELEGANCE-LS / ATLAS (Style A) shower door manual Ver 1 01/2018

NOTE:

◾ When installing the single door model, use both of the Snap-In Anti-Water Strips (#10) (Fig 10

& Fig 11) included with the Door Glass that snap into the Glass Profiles, (snap the shorter one into

the hinge side glass profile and the longer one into the strike side glass profile).

◾ When installing a door with an inline panel or an enclosure panel, discard the longer (x72”)

Snap-In Anti-Water Strip (#10) and attach the Anti-Water Strip (inline) or Anti-Water Strip

(enclosure) (that is packaged with the panel glass) onto the edge of the Panel Glass as instructed in

the panel installation manual.

For the single door installation, continue on to step #11.

If installing a model that includes panel glass (inline or enclosure), complete

the installation steps using the manual that is packaged with the panel glass.

Style B Style C Style CStyle B Style D

outside

hinge side

inside

Fig 10

Style E

door

outside outside

Elegance w/inline panel

with Support Shelves with Support Shelveswith Support Bar

Elegance EnclosureElegance-LS / Atlas w/inline panel

with L-Bar™with 6” inline panel

10. Firmly push the shorter Snap-In Anti-Water Strip (#10) into the vertical groove of the Glass

Profile for Door Glass (#02). (Fig 10)