Installation Guide

ELEGANCE / ELEGANCE-LS / ATLAS (Style A) shower door manual Ver 1 01/2018

Fig 16

Fig 17

Hours

Allow 24 hours for the silicone to cure before using the shower.

3/8” (+/-)

16. Cut the Sweep Vinyl Seal (#11) to the width of the Door Glass (#03). Next, trim the Sweep Vinyl

Seal (#11) to size up to the bottom pivot. Close the door and notch off the deflector on the inner side

of the Sweep Vinyl Seal (#11) where it overlaps the strike vinyl when the door is closed (Fig 16.3).

Press the Sweep Vinyl Seal (#11) tightly onto the bottom edge of the Door Glass (#03). (Fig 16)

17. Apply a good quality mildew-resistant silicone along the Wall Profiles where they attach to the

wall and along the threshold and the bottom Pivot Bracket. (Fig 17)