Installation Guide

Product Maintenance
BASES and BACKWALLS: To ensure long-lasting life for your acrylic back walls, wipe them off after
each use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream based
cleaners. Avoid the use of aerosol spray cleaners. Never use abrasive cleansers, metal brushes or
scrapers that could scratch or dull the surface.
GLASS: To ensure long-lasting life for your glass shower products, wipe them off after each use with
a soft cloth. Rinse and wipe off the glass using either a soft cloth or a squeegee to prevent soap
buildup and water spots (Hard water can etch the surface of the glass over time if left to dry). To
prevent scratching the surface: never use abrasive cleaners or cleaning products that contain
scouring agents. Never use bristle brushes or abrasive sponges that may scratch the surface.
HARDWARE: To ensure a long-lasting finish, wipe off the metal parts after each use with a soft cloth.
Do not use abrasive cleaners or cleaning products containing ammonia, bleach or acid. If accidentally
used, rinse the surface as soon as possible to prevent damage to the finish (peeling or corrosion).
After cleaning the polished finishes, rinse thoroughly and wipe dry with a soft cloth.
Clean stainless steel surfaces at least once a week. When applying stainless steel cleaner or polish to
stainless steel hardware, work with (not across) the grain. Never use an abrasive sponge or cloth,
steel wool or wired brush as these may permanently scratch the surfaces.
NOTE: To maximize the life of your door, it is important to regularly inspect the
glass and all hardware for misalignment, proper attachment, and/or damage.
Contact DreamLine
®
with any questions or concerns.
DreamLine
®
shower doors and enclosures are designed not to leak when installed
properly and the flow of water is not pointed directly at the hinges or vinyl seals.
ELEGANCE / ELEGANCE-LS / ATLAS (Style A) shower door manual Ver 1 01/2018
19