Installation Guide

©2018 DreamLine. All Rights Reserved
8
INLINE PANEL - Style B shower panel manual Ver 1 01/2018
If possible, allow the silicone
to cure before handling the assembled panel.
!
ATTENTION: Please note that the bottom hole
in the corner of the Panel Glass must be opposite
from the Glass Profile.
NOTE: If the Glass Profile fit is too tight over the
Panel Glass, use a rubber mallet and a piece of wood
to gently tap on the glass profile. Never use a metal
hammer or hit the profile without a wood bumper.
Fig 2
!
!
If necessary, use a
rubber mallet to tap
on the glass profile
hole for bottom
bracket
1 2
3 4
f
l
u
s
h
w
i
t
h
g
l
a
s
s
Glass Profile
Wall Profile
Glass Profile
PANEL
G
LASS
P
ANEL
G
LASS
PANEL
G
LASS
2. Apply clear silicone into the entire length of the channel of the Glass Profile (#10) and attach it to the
edge of the Panel Glass (#11). Make sure the Glass Profile (#10) is flush with the top and bottom of the
Panel Glass (#11).
Insert the Panel Glass (#11) with the attached Glass Profile (#10) into the Wall Profile (#09). (Fig 2)