ELEGANCE PLUS SHOWER DOOR AND INLINE PANEL INSTALLATION INSTRUCTIONS PLEASE REVIEW THIS ENTIRE MANUAL PRIOR TO INSTALLATION STEP 1: Install Shower Door + = + = Elegance Plus w/ 6” Inline Panel Elegance Plus w/ Inline Panel and L-Bar™ STEP 2: Install Inline Panel 1-866-731-2244 For more information about DreamLine® products please visit DreamLine.
ELEGANCE PLUS ® SINGLE DOOR d e SHOWER DOOR INSTALLATION ine rvINSTRUCTIONS L e s m e PLEASE REVIEW THIS ENTIRE MANUAL PRIOR TO INSTALLATION a R e Dr ghts © Ri All d e e in erv L s m e a R e r s D ght © Ri All ® *left-swing door installation shown Model #s SHDR-443400-## SHDR-443060-## SHDR-443465-## SHDR-444014-## SHDR-444622-## SHDR-4452225-## SHDR-4458305-## ## = finish 01 - Chrome 04 - Brushed Nickel 06 - Oil Rubbed Bronze 09 - Satin Black IMPORTANT! DreamLine® reserves the right to alter, modify or
This model is treated with DreamLine’s exclusive ClearMaxTM Glass technology. This is a specially formulated coating that prevents the build up of soap and water spots. Install the surface with the ClearMaxTM label towards the inside of the shower. Please note that depending on the model, the glass may be coated on either one or both surfaces. For best results, squeegee the glass after each use and dry with a ® soft cloth.
Section Title ClearMax™ Coating Information Warnings and General Preparaton Model Specific Preparation Tools ® Configurations Adjustable Wall Profile System Detailed Diagram of Shower Door Components Parts List Installation Steps Strike Profile Installation Decorative Cover Installation Bottom Sweep Vinyl Installation Securing the Bottom Pivot Assembly to the Threshold (optional) Product Maintenance Troubleshooting Factory Parts Information d e e n v i r L e s m e a R e Dr ghts © Ri All d e e n v i r L e
d e e n v i r L e s m e a R e r s D ght © Ri ll A tooltip IMPORTANT • • • DreamLine® reserves the right to alter, modify or redesign products any time without prior notice for product improvement and customer experience. Please refer to the model’s web page on DreamLine.com for the latest technical drawings, installation manuals, warranty information or additional product details.
©2019 DreamLine® All Rights Reserved Model Specific Preparation ! REQUIRED: 1/4” Out-of-Plumb Adjustment; Verify threshold and walls with a level Threshold must be level ±0.0 d e e n v i r L e s m e a R e Dr ghts © Ri All ® ±0.0 ! 7/8” minimum flat threshold Threshold must be level Tile TIP Tub Contact the manufacturer of the base, tub or threshold material with any questions regarding the drilling of holes into their product.
©2019 DreamLine® All Rights Reserved Tools Level Tape Measure Pencil d e e n v i r L e s m e a R e Dr ghts © Ri All ® Power Drill Painter’s Tape Drill Bit Ø1/8" (3mm) Drill Bit Ø3/16" (4mm) Razor Knife Drill Bit Ø1/4" (6mm) Drill Bit Ø5/16" (8mm) Professional-grade Glass suction cup To be sure that the correct model size has been ordered, measure the finished opening before proceeding with the installation.
©2019 DreamLine® All Rights Reserved Configurations ELEGANCE PLUS Single Door SHDR-443400-## This manual will describe the single door installation of ® the ELEGANCE PLUS models. For models with additional panel glass, use this manual first to install the door, and then use NOTE the manual that is packaged with the panel glass to install the panel.
! The Glass Profiles can be adjusted up to 1/4” within the Wall Profiles for overall width or to correct for out-of-plumb conditions within the model size. Screw them together after making final adjustments. Glass Profile Wall Profile d e e n v i r L e s m e a R e Dr ghts © Ri All ® Wall Profile Glass Profile NOTE 1/4” max adjustment ID groove 1/4 ”m 1/4 ax ”m d e e n v i r L e s m e a R e Dr ghts © Ri All ax ® ST4.
ELEGANCE PLUS Shower Door Manual Ver 1 062019 Detailed Diagram of Shower Door Components ® 15 d e e in erv L s m e a R e r s t D gh © Ri All 01 07 08 Door 14 05 de insi 03 09 12 02 d e e in erv L s m e a R e r s t D gh © Ri l l A ® The glass surface with the ClearMax™ label must be installed facing the inside of the shower 11 06 10 *left-swing door installation shown 7 © 2019 DreamLine® All Rights Reserved
©2019 DreamLine® All Rights Reserved Parts List 01 02 03 d e e n v i r L e x1 x1 s m e a R e Dr ghts © R05i 06 l Al top ® Pivot Assembly - A 04 Pivot Assembly - B Glass Profile (for Pivot side) (shorter) x1 07 Glass Profile (for Strike side)(longer) x1 08 Wall Profile 10 Wall Anchor 8mm (5/16 in) bottom Door Glass Handle x4 ® Bottom Sweep Vinyl ELEGANCE PLUS Shower Door Manual Ver 1 062019 x1 09 d e e x8 n v i r L e s m e a R e Dr 11 ghts 12 © Ri All x2 ST4.
©2019 DreamLine® All Rights Reserved Parts List 14 15 d e e n v i r L e x1 x1 s m e a R e Dr ghts © Ri ! All ® Vinyl Insert (rigid) (Pivot Side) (shorter) ! Vinyl Insert (rigid) (Strike Side) (longer) The Pivot Assemblies are paired and either one can be used as the top or bottom pivot depending on the handing of the door installation. See note* below. It is not necessary to fully disassemble the Pivot Assemblies for installation. Parts per Pivot Assembly-A 01 01.7 01.3 01.1 01.5 ITEM # 01.
ELEGANCE PLUS Shower Door Manual Ver 1 062019 Installation Steps ® 1 1 inside d e e in erv 2 L s m e a R e r s t D gh © Ri All Parts Needed 07 x1 04 x1 NOTE ◾If a stud is present behind the wall: drill a Ø3/16”(4mm) hole up to the stud, drill an Ø1/8”(3mm) pilot hole and use the ST4.0 x 40mm Pan Head Screws (#08) OR ◾If no stud is present behind the wall: drill a Ø5/16”(7mm) hole and insert the Wall Anchors (#10) and use the ST4.0 x 40mm Pan Head Screws (#08).
ELEGANCE PLUS Shower Door Manual Ver 1 062019 2 d e e in erv L s m e a R e r s t D gh © Ri All ® Fig 2a ip olt to Parts Needed 01 Pivot Assembly-A (#01) as viewed from outside d e e in erv L s m e a R e r s t D gh © Ri l l A Fig 2b ® 11 *left-swing door installation shown x1 02 x1 tooltip Tools Needed © 2019 DreamLine® All Rights Reserved
ELEGANCE PLUS Shower Door Manual Ver 1 062019 3 2 d e e in erv L s m e a R e r s t D gh © Ri All 1 ® inside 3 inside d e e in erv L s m e a R e r s t D gh © Ri l l A ® Fig 3 Parts Needed 08 x5 Tools Needed *left-swing door installation shown 12 © 2019 DreamLine® All Rights Reserved
ELEGANCE PLUS Shower Door Manual Ver 1 062019 4 1 d e e in erv L s m e a R e r s t D gh © Ri All 2 3 ® Fig 4 1 2 3 Parts Needed 01.10 / 02.10 d e e in erv L s m e a R e r s t D gh © Ri l l A x2 ® *left-swing door installation shown NOTE 13 The Glass Profile for Pivot Side (#04) is the shorter of the two Glass Profiles and has an additional pair of holes at each end. These extra holes are not present in the Glass Profile (#05) that is used for the strike-side. NOTE 01.8/02.
ELEGANCE PLUS Shower Door Manual Ver 1 062019 5 ! Protect the edges of the door glass from making contact with the walls and threshold during installation and adjustment. d e e in erv L s m e a R e r s t D gh © Ri All ® ! Leave the corner protectors on the glass until it is necessary to remove them. Do Not install the handle yet. Parts Needed 01 x1 02 d e e in erv L s m e a R e r s Fig 5 t D gh © Ri l l A ® ! 14 ! The Door Glass (#03) has a top and bottom notch for the Pivot Assemblies (#01/02).
ELEGANCE PLUS Shower Door Manual Ver 1 062019 6 1 ® 2 d ve e r n i L e s m e a sR e r D ght © Ri All TIP ±0.0 Fully tighten this Pivot Assembly bolt (#01.3 / 02.3) after adjusting the door glass to level. Additional overall width adjustment may be necessary during the installation of the strike side profiles or with models that include an inline panel. 1 max adjustment ID groove d e e in erv L s m e a R e r s t D gh © Ri l l A ® Fig 6 *left-swing door installation shown 15 ! Parts Needed 01.
ELEGANCE PLUS Shower Door Manual Ver 1 062019 Handle Installation 7 d e e in erv L s m e a R e r s t D gh 2 © Ri All ® 1 3 sideview insid inside e side out d e e in erv L s m e a R e r s t D gh © Ri l l A TIP ® Fig 7 *left-swing door installation shown Parts Needed 06 x1 Tools Needed Tighten all four Handle (#06) set screws to ensure the handle is secured to the Door Glass (#03). (see Fig 7.
d e e in erv L s m e a R e r s t D gh © Ri All ip olt to ELEGANCE PLUS Shower Door Manual Ver 1 062019 8 ® d e e in erv L s m e Fig 8 a R e r s t D gh © Ri l l A ® *left-swing door installation shown 17 © 2019 DreamLine® All Rights Reserved
ELEGANCE PLUS Shower Door Manual Ver 1 062019 9 NOTE Sealing the hole in the bottom Pivot Bracket (#02.2) is important to prevent water leakage. Screwing the bottom Pivot Bracket (#02.2) to the threshold is optional.
ELEGANCE PLUS Shower Door Manual Ver 1 062019 Strike Profile Installation 10 d e 2 e in erv L s m e a R e r s t D gh © Ri All 1 Glass Profile Wall Profile Fig 10 ® max adjustment ID groove max adjustment ID groove 3 Parts Needed 05 d e e in erv L s m e a R e r s t D gh © Ri l l A ® x1 07 x1 15 19 x1 © 2019 DreamLine® All Rights Reserved
ELEGANCE PLUS Shower Door Manual Ver 1 062019 11 1 ide ins 2 d e e in erv L s m e a R e r s t D gh © Ri All 3 1/16” - 1/8” 5 ® 6 4 7 ide ins d e e in erv L s m e a R e r s t D gh © Ri l l A Align the Strike Profile (#05) to the Door Glass. Create 1/16” to 1/8” space between the edge of the door glass and the strike vinyl by adjusting the glass profiles. Make sure the door glass makes full contact with the strike vinyl when the door is fully closed. (Fig 11.
1 d e e in erv L s m e a R2 e r s t D gh © Ri All ip olt to ELEGANCE PLUS Shower Door Manual Ver 1 062019 12 ® d e e in erv L s m e a R e r s t D gh © Ri l l A ® Fig 12 Parts Needed 08 x3 Tools Needed 21 © 2019 DreamLine® All Rights Reserved
ELEGANCE PLUS Shower Door Manual Ver 1 062019 13 1 d e e in erv L s m e a R e r s t D gh © Ri All 2 ® overview of Door Glass and Wall Profile for Strike side 3 1/16” - 1/8” NOTE During adjustment: Do Not expose the 1/4” max adjustment ID groove in the glass profile(s). Max Adjustment ID groove d e e n erv i L Fig 13 s m e a R e r s t D gh © Ri l l A ® *left-swing door installation shown 22 ! Parts Needed 01.
ELEGANCE PLUS Shower Door Manual Ver 1 062019 Decorative Cover Installation 14 d e e i2n erv L s m e a R e r s t D gh © Ri All ® 1 3 Ø1/8” 1 ide ins ide Fig 14 ins ! NOTE 23 *left-swing door installation shown from the inside ! Ø1/8” 2 3 d e e in erv L s m e a R e r s t D gh © Ri l l A ® When installing this door along with an inline panel, postpone this step until overall width adjustments have been made.
ELEGANCE PLUS Shower Door Manual Ver 1 062019 Bottom Sweep Vinyl Installation 15 d e e in erv L s m e a R e r s t D gh © Ri All Fig 15b ® Fig 15a 1 tooltip TIP 2 3 d e e in erv L s m e a R e r s t D gh tooltip © Ri l l A ® Parts Needed 11 Press the Sweep Vinyl Seal tightly onto the bottom edge of the Door Glass (#03).
ELEGANCE PLUS Shower Door Manual Ver 1 062019 16 NOTE The surfaces need to be clean and free of debris before applying silicone. d e e in erv L s m e a 24 R e r s t Hours D gh This completes the single door installation. © Ri ! For the installation of a model that includes All inline panel glass: ® -Complete the installation steps using the manual that is packaged with the inline panel glass.
ELEGANCE PLUS Shower Door Manual Ver 1 062019 Securing the Bottom Pivot Assembly To The Threshold 1 2 d 4 e e n v M i r L TTO e O s B m e a R e r s t D gh © Ri All ® 3 P TO 5 6 7 NOTE After the bottom pivot is screwed to the threshold, adjustment will be limited to the strike side wall profile system.
©2019 DreamLine® All Rights Reserved Product Maintenance BASES and BACKWALLS: To ensure long lasting life for your acrylic back walls: wipe them off after each use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream based cleaners. Avoid the use of aerosol spray cleaners. Never use abrasive cleansers, metal brushes or scrapers that could permanently scratch or dull the surface.
Problem/Symptom Suggested Solution Missing Parts •Check all shipping/packaging material for missing parts/components. •If not found, contact DreamLine Customer Support [1-866-731-2244] to order factory part replacement. Door Glass (#03) does not close flush with the Strike Profile • Inspect the Bottom Sweep Vinyl (#11) and ensure the orientaton of the vinyl is installed correctly.
ELEGANCE PLUS Shower Door Manual Ver 1 062019 Factory Parts Information d e e in erv L s m e a R e r s t D gh © Ri All ® 34"×72" ELEGANCE PLUS - SHDR-443400-## ITEM # Single Door Model FACTORY PARTS INFORMATION FACTORY PART NUMBER ITEM DESCRIPTION QTY 01 07021222 / 07024222 / 07026222 / 07029222 Pivot Assembly-A 1 pc 02 07021223 / 07024223 / 07026223 / 07029223 Pivot Assembly-B 1 pc ST4.
ELEGANCE PLUS Shower Door Manual Ver 1 062019 Factory Parts Information d e e in erv L s m e a R e r s t D gh © Ri All ® 30"×72" ELEGANCE PLUS - SHDR-443060-## ITEM # Door with 6” Inline Panel FACTORY PARTS INFORMATION FACTORY PART NUMBER ITEM DESCRIPTION QTY 01 07021222 / 07024222 / 07026222 / 07029222 Pivot Assembly-A 1 pc 02 07021223 / 07024223 / 07026223 / 07029223 Pivot Assembly-B 1 pc 092108 ST4.
ELEGANCE PLUS Shower Door Manual Ver 1 062019 Factory Parts Information d e e in erv L s m e a R e r s t D gh © Ri All ® 34"×72" ELEGANCE PLUS - SHDR-443465-## ITEM # Door with 6-1/2” Inline Panel FACTORY PARTS INFORMATION FACTORY PART NUMBER ITEM DESCRIPTION QTY 01 07021222 / 07024222 / 07026222 / 07029222 Pivot Assembly-A 1pc 02 07021223 / 07024223 / 07026223 / 07029223 Pivot Assembly-B 1 pc 092108 ST4.
ELEGANCE PLUS Shower Door Manual Ver 1 062019 Factory Parts Information d e e in erv L s m e a R e r s t D gh © Ri All ® 39-3/4"×72" ELEGANCE PLUS - SHDR-444014-## ITEM # Door with 14” Inline Panel FACTORY PARTS INFORMATION ITEM DESCRIPTION FACTORY PART NUMBER QTY 01 07021222 / 07024222 / 07026222 / 07029222 Pivot Assembly-A 1 pc 02 07021223 / 07024223 / 07026223 / 07029223 Pivot Assembly-B 1 pc 092108 ST4.
ELEGANCE PLUS Shower Door Manual Ver 1 062019 Factory Parts Information d e e in erv L s m e a R e r s t D gh © Ri All ® Door with 22” Inline Panel & 12” L-Bar™ 46"×72" ELEGANCE PLUS - SHDR-444622-## ITEM # FACTORY PARTS INFORMATION ITEM DESCRIPTION FACTORY PART NUMBER QTY 01 07021222 / 07024222 / 07026222 / 07029222 Pivot Assembly-A 1 pc 02 07021223 / 07024223 / 07026223 / 07029223 Pivot Assembly-B 1 pc 092108 ST4.
ELEGANCE PLUS Shower Door Manual Ver 1 062019 Factory Parts Information d e e in erv L s m e a R e r s t D gh © Ri All ® Door with 22-1/2” Inline Panel & 12” L-Bar™ 51-3/4"×72" ELEGANCE PLUS - SHDR-4452225-## ITEM # FACTORY PARTS INFORMATION ITEM DESCRIPTION FACTORY PART NUMBER QTY 01 07021222 / 07024222 / 07026222 / 07029222 Pivot Assembly-A 1 pc 02 07021223 / 07024223 / 07026223 / 07029223 Pivot Assembly-B 1 pc 092108 ST4.
ELEGANCE PLUS Shower Door Manual Ver 1 062019 Factory Parts Information d e e in erv L s m e a R e r s t D gh © Ri All ® Door with 30-1/2” Inline Panel & 18” L-Bar™ 58"×72" ELEGANCE PLUS - SHDR-4458305-## ITEM # FACTORY PARTS INFORMATION FACTORY PART NUMBER ITEM DESCRIPTION QTY 01 07021222 / 07024222 / 07026222 / 07029222 Pivot Assembly-A 1 pc 02 07021223 / 07024223 / 07026223 / 07029223 Pivot Assembly-B 1 pc 092108 ST4.
d e e n v i r L e s m e a R e r s D ght © Ri All ® d e e n v i r L e s m e a R e r s D ght © Ri All ® TEL: 866-731-2244 FAX: 866-857-3638 DREAMLINE.COM For more information on DreamLine® Shower Doors and Enclosures please visit DreamLine.
Install the door first INLINE PANEL ® (STYLE F) d INLINE PANEL GLASS ILNSTALLATION ine rveINSTRUCTIONS e s m e PLEASE REVIEW THIS ENTIRE MANUAL PRIOR TO INSTALLATION a R e Dr ghts © Ri All d e e in erv L s m e a R e r s D ght © Ri All ® *with L-Bar™ support bracket right-hand inline panel installation shown *L-Bar™ only included with ELEGANCE PLUS models with nominal panel glass sizes 22”, 22-1/2”, 30”, 30-1/2”& 34” IMPORTANT! DreamLine® reserves the right to alter, modify or redesign products at an
This model is treated with DreamLine’s exclusive ClearMaxTM Glass technology. This is a specially formulated coating that prevents the build up of soap and water spots. Install the surface with the ClearMaxTM label towards the inside of the shower. Please note that depending on the model, the glass may be coated on either one or both surfaces. For best results, squeegee the glass after each use and dry with a ® soft cloth.
Section Title ClearMax™ Coating Information Warnings and General Preparaton Model Specific Preparation ® Tools Detailed Diagram of Inline Panel Glass Components Parts List Installation Steps 180º Strike Vinyl Installation Reversible L-Bar™ Installation (*for ELEGANCE PLUS model only) Product Maintenance Reversible L-Bar™ Feature Troubleshooting Factory Parts Information Product SKUs d e e n v i r L e s m e a R e Dr ghts © Ri All d e e n v Symbol Legendi r L e s m e a R e Dr ghts © Ri All Page # — 2 3 4 5
d e e n v i r L e s m e a R e r s D ght © Ri All WARNING DISCLOSURE STATEMENT IMPORTANT • • • DreamLine® reserves the right to alter, modify or redesign products any time without prior notice for product improvement and customer experience. Please refer to the model’s web page on DreamLine.com for the latest technical drawings, installation manuals, warranty information or additional product details.
©2020 DreamLine® All Rights Reserved Model Specific Preparation ! REQUIRED: minimum threshold 1/2” Out-of-Plumb Adjustment with the Inline Panel; Verify threshold and walls with a level Threshold must be level ±0.0 d e e n v i r L e s m e a R e Dr ghts © Ri All ® ±0.0 ! Tile TIP Acrylic 5/8” minimum flat threshold right-hand orientation shown Tub Contact the manufacturer of the base, tub or threshold material with any questions regarding the drilling of holes into their product.
©2020 DreamLine® All Rights Reserved Tools Tape Measure Level Drill Bit Ø1/8" (3mm) Drill Bit Ø3/16" (4mm) Metal File TIP #2 Phillips Screwdriver Pencil 100 % Silicone d e e n v i r L e s m e a R e Dr ghts © Ri All Drill Bit Ø5/16" (8mm) Safety Glasses #2 Phillips Driver Bit ® Soft Head Hammer Work Gloves Hacksaw Razor Knife OR Power Drill Mitre Saw Professional-grade Glass Suction Cup (optional but recommended) Measure the finished opening before proceeding with the installation to b
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 Detailed Diagram of Inline Panel Glass Components ® d e e in erv L s m e a R e r s t D gh 11 © Ri All 09 19 23 d e 29 e in erv L s m e a R e r s t D gh © Ri l l A 13 09 ® The glass surface with the ClearMax™ label must be installed facing the inside of the shower 23 5 right-hand panel installation shown © 2019 DreamLine® All Rights Reserved
©2020 DreamLine® All Rights Reserved Parts List 09 11 13 d e e n v i r L e x1 x1 s m e a R e Dr ghts © R23i 28 l Al ® Vertical U-Channel 19 180˚ Strike Vinyl Inline Panel Glass x1 29 ST4.2×40mm Countersunk Screw x18 Wall Anchor Ø5/16” (8mm) x18 PVC Glass Spacer 0.
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 The Unidoor Plus, Unidoor-X or Elegance Plus Shower Door must be installed prior to proceeding with the following Inline Panel Glass installation instructions.
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 Installation Steps 1 d e e in erv L s m e a R e r s t D gh © Ri All 1 ® 2 insid e outs ide TIP To assist with aligning the Inline Panel Glass (#11) with the pre-installed Door Glass, hold the door glass parallel with the outside of the threshold and mark a reference line on the threshold.
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 2 d e e in erv L s m e a R e r Glass s t D gWidth © Ri h (W) All ® W Glass Height (H) H d e e in erv L s m e a R e r s t D gh © Ri l l A ® Fig 2 Parts Needed 11 x1 Tools Needed 9 © 2019 DreamLine® All Rights Reserved
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 3 Cut the Bottom U-Channel to: ® Glass Width (W) + 3/16” = (L)** (see exception below) Fig 3 (L) TIP d e e in erv L s m e a R e r s t D gh © Ri All OR (L) Plumb line Use a metal file to deburr the cut end ! **EXCEPTION: If the wall is out-of-plumb at the bottom, measure that dimension as (A) and add (A) to the finished cut length of the U-channel (+1/2” max): d e e in erv L s m e a R e r s t D gh © A Ri l l A ® Out-of-plumb at
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 4 d e e in erv L s m e a R71” (1803.
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 5 d e e in erv L s m e a R e r s t D gh © Ri All Fig 5b ® Fig 5a 2” (50.8mm) d e e in erv L s m e a R e r s t D gh © Ri l l A ® ! Cut several 2” - 3” pieces of the PVC Glass Spacer 0.5mm (#28).
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 6 d e e in erv L s m e a R e r s t D gh © Ri All ® d e e in erv L s m e a R e r s t D gh © Ri l l A ® Fig 6a NOTE The 180˚ Strike Vinyl (#19) will extend above the panel glass for now, but will be notched to fit around the bottom u-channel. See step#14.
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 7 1/2” MAX d e e in erv L s 2 1am e R e r s t D gh © Ri All ® inline pane l doo door 3 panel r 1/16” - 1/8” 4 5 d e e in erv L s m e a R e r s t D gh © Ri l l A ® NOTE Fig 7 NOTE The top of the Inline Panel Glass must be flush with the top of the Door Glass. (Fig 7.3) The Vertical U-Channel (#09) will allow for up to 1/2” of out-of-plumb adjustment.
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 8 d e e in erv L s m Fige 8b a R e r s t D gh © Ri All ® Fig 8c d e e in erv Fig 8a L s m e a R e r s t D gh © Ri l l A ® NOTE Remove the PVC Glass Spacers 0.5mm (#28) from the Bottom U-Channel (#29). (Fig 8c) These must be reinstalled in step #12.
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 9 NOTE Fig 9 NOTE The surfaces need to be clean and free of debris before applying silicone. d e e in erv L s m e 1 2 a R e r s t D gh © Ri All 3 1 3 ® 2 d e e in erv L s m e a R e r s t D gh © Ri l l A ◾For installation into an Acrylic Threshold: drill an Ø1/8”(3mm) hole and use the ST4.2 x 40mm Countersunk Screw (#23) OR ◾For installation into a Tile Threshold: drill a Ø3/16”(4.
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 10 d e e in erv L s m e a R e r s t D gh © Ri All ® 1 ® ! 2 e r n i L e s m e Fig 10 a R e r s t D gh © Ri l l A d e v Parts Needed 23 x4 Tools Needed To prevent damage to the glass, be sure that the screws are fully countersunk and that the screw heads do not stick up above the surface of the u-channel 17 © 2019 DreamLine® All Rights Reserved
d e e in erv L s m e a R e r s t D gh © Ri 1 All 2 ® ® Fig 11 e r n i L e s m e a sR e r D ght © Ri l l A d e v 3 ip olt to INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 11 Parts Needed 23 x4 Tools Needed 18 © 2019 DreamLine® All Rights Reserved
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 12 1 d e e in erv L s m e a R e r s t D gh © Ri All ® 2 d e e in erv L s m e a R e r s t D gh © Ri l l A Fig 12 NOTE 3 ® After applying silicone into the bottom U-Channel install several 2” - 3” pieces of the PVC Glass Spacer 0.5mm (#28) into the Bottom U-Channel (#29) to protect the bottom edge of the glass. (Fig 12.
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 13 2d e e in erv L s m e a R e r s t D gh © Ri ll A 1 1 ® 1 2 2 d e e in erv L s m e a Fig 13 e R r s t D gh © Ri l l A ® Tools Needed 20 © 2019 DreamLine® All Rights Reserved
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 180° Strike Vinyl Installation 14 d e e in erv L s m e a 2 R e r s t D gh © Ri All ® 1 3 inside inline panel 1” 4 door panel d e e 1/16” 1/8” n v i r L e s m e a sR e Fig 14 r D ght © Ri l l A ® Parts Needed 19 x1 Tools Needed 21 © 2019 DreamLine® All Rights Reserved
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 15 The surfaces need to be clean and free of debris before applying silicone. NOTE d e e in erv L s m e a R e r s t D gh © Ri All ® 24 Hours NOTE If the model does not include an L-Bar™ Support Bracket, this completes the Inline Panel installation.
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 Reversible L-Bar™ Installation 16 (L-Bar™ for ELEGANCE PLUS model only) d e e in erv L s m e a R e r s t D gh © Ri All ® 30.5 30.2 30.6 30.9 30.10 30.8 30.1 30.7 30.11 30.3 30.12 30.4 Right-handed orientation shown* NOTE NOTE Item Item Description Quantity 30.1 30.2 30.3 30.4 30.5 30.6 30.7 30.8 30.9 30.10 30.11 30.
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 17 3 d e e in erv L s m e a R e r s t D gh © Ri All 1 ® 2* 5 6 7 d e e in erv L m Res TIP rea D ghts © Ri l l A Fig 17 4 ® right-handed installation shown *see NOTE *Leave the L-Bar™ decorative cover attached when marking the L-Bar™ position on the wall to allow space (1/16”-1/8”) to re-attach the cover plate after installation. NOTE 24 *The 0.5mm PVC Spacer (#30.4) for the L-Bar™ Glass Holder (#30.
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 18 1 2 ® e in3* d e rv L e s m e a sR e r D ght © Ri All Max 3/16” (4mm) 4* Max 3/16” (4mm) Fig 18 right-handed installation shown d e e in erv L s m e a R e r s t D gh © Ri l l A ® NOTE * To adjust the angle of the L-Bar™: 25 Loosen the M5 x 14.5 screws, rotate the appropriate set screw (See Fig 18.3 and 18.4) to adjust the angle of the L-Bar™ (up to 3/16” (4mm)) in the desired direction. Hand tighten the M5 x 14.
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 19 d e e n erv i L 2 s m e a R e r s t D gh © Ri All ® 1 0 - 1/16” (2mm) 3 Fig 19 right-handed installation shown d e e in erv L s m e a R e r s t D gh © Ri l l A ® Tools Needed 26 © 2019 DreamLine® All Rights Reserved
©2020 DreamLine® All Rights Reserved Product Maintenance BASES and BACKWALLS: To ensure long lasting life for your acrylic back walls: wipe them off after each use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream based cleaners. Avoid the use of aerosol spray cleaners. Never use abrasive cleansers, metal brushes or scrapers that could permanently scratch or dull the surface.
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 Reversible L-Bar™ Feature: Glass Holder (for ELEGANCE PLUS®model only) left-handed orientation Step 1 d e e in erv L s m e a R e r s t D gh © Ri l l A 1 2 3 4 6 5 d e e in erv L s m e a R e r s t D gh © Ri l l A ® Tools Needed 28 left-to-right handed orientation shown © 2019 DreamLine® All Rights Reserved
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 Reversible L-Bar™ Feature: Wall Bracket 1 5 2 6 9 d e rv ® in3 e L e s m e a sR e r D ght © Ri All 7 Step 2 4 8 ® n10e i L e s m e a sR e r D ght © Ri l l A d e rv right-handed orientation Tools Needed 29 left-to-right handed orientation shown © 2019 DreamLine® All Rights Reserved
Problem/Symptom Suggested Solution •Check all shipping/packaging material for missing parts/components. •If not found, contact DreamLine Customer Support [1-866-731-2244] to order factory part replacement. Missing Parts •Inspect the 180º Degree Strike Vinyl (#19) and ensure the orientation of the Door Glass does not close vinyl is correct.
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 Factory Parts Information d e e in erv L s m e a R e r s t D gh © Ri All INLINE PANEL [STYLE F] - HARDWARE ITEM # ® FACTORY PART NUMBER FACTORY PARTS INFORMATION ITEM DESCRIPTION 09 04154011-1930 / 04154041-1930 / 04154061-1930 / 04154091-1930 U-Channel 1" Aluminum for 10mm (3/8in.
©2020 DreamLine® All Rights Reserved Product SKUs d e e n v i r L e s m e a R e Dr ghts © Ri All ® Elegance Plus w/inline panel SHDR-443060-## SHDR-443465-## SHDR-444014-## SHDR-444622-## SHDR-4452225-## SHDR-4458305-## Unidoor Plus Style F SHDR-242907210-## SHDR-243007210 SHDR-243107210 SHDR-243207210 SHDR-243307210 SHDR-243407210 SHDR-243507210 SHDR-243607210 SHDR-242957210 SHDR-243057210 SHDR-243157210 SHDR-243257210 SHDR-243357210 SHDR-243457210 SHDR-243557210 SHDR-243657210 SHDR-243707210 SHDR-2438
©2020 DreamLine® All Rights Reserved Product SKUs d e e n v i r L e s m e a R e Dr ghts © Ri All ® Unidoor-X Style M1 D12306572-## D1230672 D12314572 D1231472 D12322572 D1232272 D12330572 D1233072 D12406572 D1240672 D12414572 D1241472 D12422572 D1242272 D12430572 D1243072 D12506572 D1250672 D12514572 D1251472 D12522572 D1252272 D12530572 D1253072 D12606572 D1260672 D12614572 D1261472 D12622572 D1262272 D12630572 D1263072 D12706572 D1270672 D12714572 D1271472 D12722572 D1272272 D12730572 D1273072 D128065
d e e n v i r L e s m e a R e Dr ghts © Ri All ® d e e n v i r L e s m e a R e Dr ghts © Ri All ® TEL: 866-731-2244 FAX: 866-857-3638 DREAMLINE.COM For more information on DreamLine® Shower Doors and Enclosures please visit DreamLine.
