Installation Guide

© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
Parts List
ELEGANCE PLUS Shower Door Manual Ver 1 062019 9
©2019 DreamLine
®
All Rights Reserved
Vinyl Insert (rigid)
(Pivot Side)
Vinyl Insert (rigid)
(Strike Side)
15
14
x1
x1
01.6
01.1
01.2
01.3
02.11
01.8
01.4
02.9
01.5
01.7
01.10
02.10
!
It is not necessary to fully disassemble
the Pivot Assemblies for installation.
Parts per Pivot Assembly-A
Parts per Pivot Assembly-B
01
02
*Pivot Assembly-A (#01) shown
*Pivot Assembly-B (#02) shown
(shorter)
(longer)
OR
01.11**
01.9**
OR
ITEM # ITEM DESCRIPTION QTY
01.1 Pivot Retainer 1 pc
01.2 Pivot Bracket 1 pc
01.3* M6 x 12 Socket Head Hex Screw 1 pc
01.4 Pivot Body 1 set
01.5 Clear Gasket 2 pcs
01.6 Back Plate 1 pc
01.7 M6 x 14 Countersunk Hex Screw 2 pcs
01.8 ST4.2×25mm Countersunk Screw 1pc
01.9 ST4.2 x 40 Countersunk Screw 1 pc
01.10** M6×12 Hex Socket Head Cap Screw 1 pc
01.11** M6×12 Countersunk Hex Head Screw 1 pc
Pivot Assembly A
ITEM # ITEM DESCRIPTION QTY
02.1 Pivot Retainer 1 pc
02.2 Pivot Bracket 1 pc
02.3* M6 x 12 Socket Head Hex Screw 1 pc
02.4 Pivot Body 1 set
02.5 Clear Gasket 2 pcs
02.6 Back Plate 1 pc
02.7 M6 x 14 Countersunk Hex Screw 2 pcs
02.8 ST4.2×25mm Countersunk Screw 1pc
02.9 ST4.2 x 40 Countersunk Screw 1 pc
02.10** M6×12 Hex Socket Head Cap Screw 1 pc
02.11** M6×12 Countersunk Hex Head Screw 1 pc
Pivot Assembly B
!
The Pivot Assemblies are paired
and either one can be used as
the top or bottom pivot
depending on the handing of
the door installation.
See note* below.
02.3*
(when used as a top pivot assembly)
◾*When used as a top pivot
assembly: use screw / item #01.3/02.3
◾**When used as a bottom pivot
assembly: use either screw / item
#01.10/02.10 or #01.11/02.11
(when used as a bottom pivot assembly)
NOTE