Installation Guide

Parts Needed

Tools Needed

ELEGANCE PLUS Shower Door Manual Ver 1 062019 15

Each two piece wall profile system (consisting of the Glass Profiles (#04/05) and Wall Profiles

(#07)) will allow for overall width and/or 1/4” out-of-plumb adjustment within the model size.

TIP

Fully tighten this Pivot Assembly bolt (#01.3 / 02.3)

after adjusting the door glass to level. Additional

overall width adjustment may be necessary during the

installation of the strike side profiles or with models

that include an inline panel.

Fig 6

*left-swing door installation shown

01.3

max adjustment

ID groove

as viewed from the inside