Installation Guide

Tools Needed

Parts Needed

ELEGANCE PLUS Shower Door Manual Ver 1 062019 18

NOTE

Sealing the hole in the bottom Pivot Bracket (#02.2) is

important to prevent water leakage.

Screwing the bottom Pivot Bracket (#02.2) to the

threshold is optional. (See page 26 for details)

*Any width and/or out-of-plumb adjustments using

the adjustable wall profile system must be made prior

to screwing the Pivot Assembly-B (#02) down into the

threshold. See Page 26 for specific instructions.

When installing the door along with an inline panel model,

postpone this step until after aligning the panel glass.

Fig 9

2 3

*left-swing door installation shown

02.11