Installation Guide

Tools Needed

ELEGANCE PLUS Shower Door Manual Ver 1 062019 20

NOTE

◾If a stud is present behind the wall:

drill a Ø3/16”(4mm) hole up to the stud,

drill an Ø1/8”(3mm)

pilot hole

and use the ST4.0 x 40mm Pan Head Screws (#08)

◾If no stud is present behind the wall:

drill a Ø5/16”(7mm) hole and insert the Wall Anchors (#10)

and use the ST4.0 x 40mm Pan Head Screws (#08).

Fig 11

1 2 3 4

5 6

*left-swing door installation shown

Align the Strike Profile (#05) to the Door Glass. Create

1/16” to 1/8” space between the edge of the door glass and

the strike vinyl by adjusting the glass profiles. Make sure the

door glass makes full contact with the strike vinyl when the

door is fully closed. (Fig 11.1)

inside

1/16” - 1/8”

inside