Installation Guide

Tools Needed

Securing the Bottom Pivot Assembly To The Threshold

Parts Needed

ELEGANCE PLUS Shower Door Manual Ver 1 062019 26

NOTE

◾For installation into an Acrylic Threshold:

drill a Ø1/8”(3mm) hole and use the

ST4.2×40mm Countersunk Screw (#01.9 / 02.9)

◾For installation into a Tile Threshold:

drill a Ø3/16”(4mm) hole up to the stud, drill an Ø1/8”(3mm)

pilot hole and use the ST4.2×40mm Countersunk Screw

(#01.9 / 02.9).

5 6 7

1 2 3 4

8 9 10 11

TOP

BOTTOM

TOP

Use caution not to scratch the hinge

surface.

Use a longer drill bit to drill through the

hole in the Pivot Assembly.

see Fig 5

01.9 / 02.9

After the bottom pivot is

screwed to the threshold,

adjustment will be limited

to the strike side wall profile

system.