Installation Guide

Table Of Contents

SAPPHIRE shower and tub door manual Ver 1 Rev 1a 08/2020

Guide Rail Bracket Assembly

set screw

top

wall

bracket

ST4.2x40 csk screws (#17)

5/16” wall

anchors

Fig 11

Fig 12

NOTE: Do Not overtighten the screws

as this may deform the wall profile.

outside

11. Apply silicone to the back surface of the Wall Profile (#06).

Remove the top of the Guide Rail Bracket Assembly (#02). Place the Wall Profile (#06) back into

position on the wall.

Remove the top from the Guide Rail Bracket Assembly (#02) and align the Guide Rail Bracket

Assembly (#02) with the top two holes in the Wall Profile (#06).

Attach the Guide Rail Bracket Assembly (#02) to the wall through the Wall Profile (#06) using the

ST4.2 x 40 Countersunk Screws (#17). (Fig 11)

12. Attach the remaining Guide Rail Bracket Assembly (#02) onto the opposite end of the Upper

Guide Rail (#01).

(Fig 12)