User Manual

10ESSENCE-H manual Ver 1 05/2017
©2017 DreamLine. All Rights Reserved
Bottom Rail
Use several strips of Painter’s Tape
to hold the bottom rail in position
while the silicone cures.
Fig 5
Fig 6
outside
1/16”
Wall profile
wall
5. Replace the Anti-Splash Threshold (#21)
onto the marked position on the threshold.
(Fig 5)
6. Run a bead of silicone along the
inside edge of the Anti-Splash
Threshold (#21). (Fig 6)
TIP: Use a Wall Profile (#19) as a spacer to
offset the Anti-Splash Threshold (#21)
1/16” from each wall. The Anti-Splash
Threshold (#21) should not make contact
with the walls.