User Manual

12ESSENCE-H manual Ver 1 05/2017

Fig 8

Ø see

step #8

only use

anchors

with tile

Fig 9

center

threshold

Anti-Splash Threshold

decorative cap

8. Place the Guide Block (#22) onto the threshold, against the Anti-Splash Threshold (#21) and

align the hole with the centerline mark from the previous step. Mark the hole for drilling.

◾For installation into a tile threshold, drill a Ø5/16” (8mm) hole and insert the Wall Anchor (#18)

◾For installation into an acrylic threshold, drill an Ø1/8” (3mm) hole and do not use an anchor

Apply silicone to the bottom of the Guide Block (#22) and attach it to the threshold using an

ST4.2 x 20 Round Head Screw (#24). Cover with the decorative cap. (Fig 8 and Fig 9)