Installation Guide

ENIGMA AIR manual Ver 1 Rev 5.2 02/2018

U-Channel

Ø5/16"

Fig 4

Fig 5

4. Align the outside edge of the U-Channel

(#01) with the inside of the mark on the

threshold.

Use a level to plumb the U-Channel (#01) and

mark its position on the wall. Mark the four

holes for drilling through the pre-drilled holes

in the U-Channel (#01). (Fig 4)

5. Remove the U-Channel (#01) from the wall and drill the anchor holes using a Ø5/16” drill bit and

insert the Wall Anchors (#16). Add a bead of silicone to the back surface of the U-Channel (#01) and

attach it to the wall using four of the ST4.2 x 40 Countersunk Screws (#17). (Fig 5)