Installation Guide

10ENIGMA SKY shower and tub door manual Ver 1 Rev 1 02/2018

U-Channel

reference

mark

Fig 4

Fig 5

**NOTE: When installing to

a stud, drill a Ø1/4” hole and

do not use the anchors.

or Ø5/16"

Ø1/4"

2**

3**

4. Align the edge of the U-Channel (for Panel Glass) (#01)

to the inside of the reference mark on the threshold. Use a

level to hold the U-channel plumb and mark the position of

the U-Channel (for Panel Glass) (#01) on the wall.

Also mark the four holes for drilling through the pre-drilled

holes in the U-channel. (Fig 4)

5. Remove the U-Channel (for Panel Glass) (#01) from the wall, drill the anchor holes using a Ø5/16”

drill bit and insert the Ø5/16” Plastic Wall Anchors (#16) (**see Note below).

Apply a bead of silicone to the back of the U-Channel (for Panel Glass) (#01) and attach it to the wall

using four of the ST4.2 x 40 Round Head Screws (#17). (Fig 5)